蓝猫跳线\桥接工具 Blue Cat Audio Blue Cat’s PatchWork 信号链路组合音频路由切换

支持系统：Windows.MAC

音源厂商：https://www.bluecataudio.com/Products/Product_MB7Mixer/

独立安装程序 PC + MAC

文件大小：795MB

您可以将效果器串联起来，也可以创建最多 8 个可独立激活的并行效果器链。这样，您就可以在插件中创建自己喜欢的效果器或乐器配置，而无需多个总线。这些配置可以保存为预设并立即调用，或者使用任何插件格式（完整列表见下文）与多个 DAW 共享。使用内置音频效果器为您自己的插件链增添色彩。

尽管名称如此，但您可以告别线缆的束缚：配置插件路由就像在机架矩阵中添加或移除一行或一列一样简单。所有插件还可以使用插件提供的虚拟 MIDI 端口相互通信或与主机应用程序通信。

每个插件插槽都包含延迟补偿、预设管理、撤消/重做集成、音频输入/输出选择和单独的插件旁路功能，以实现最佳运行。该插件还会存储每个插件窗口的位置，以便布局在会话中恢复或与预设一起保存。

此外，子插件还可以通过 Blue Cat 的 PatchWork 参数映射功能实现自动化，或通过外部控制界面进行控制。

本产品既可以作为音频插件（效果器或虚拟乐器），也可以作为独立应用程序使用，因此可以单独使用，也可以插入您常用的 DAW 中的任何类型的轨道，最多可支持 16 个音频通道。

此外，还提供输入和输出电平表，用于监控发送到插入插件的信号，包括侧链和辅助通道。

如果您正在寻找用于多频段处理的多频段插件宿主，请查看 Blue Cat 的 MB-7 Mixer 插件。此外，任何 Blue Cat Audio 插件都兼容并可由本软件托管。

正在寻找 PatchWork 中更高级的音频路由？请查看 Blue Cat 的 Connector！

版权声明：VST 是 Steinberg Media Technologies GmbH 的商标。

主要功能：
可配置的 VST、VST3 或 Audio Unit 插件机架：最多可串联或并联 64 个第三方插件或乐器。
30 种内置效果：混响、均衡器、滤波器、移调和移频器、延迟、调制效果、压缩器、门限、比特压缩器、波形整形器等。
可作为效果器、虚拟乐器或独立应用程序使用。
创建您自己的效果链：最多 8 个"前级"和"后级"插件插槽，用于串联插件。
并行处理变得简单：最多 8 个并行插件链，并带有相位翻转、独奏和增益控制。
并行链支持多核处理。
插件过采样：为每个插件选择过采样率和质量。
最多可并联 8 个虚拟乐器，并在插件内进行混音。
全局干湿控制（"混音"）。
宏控制和参数映射：映射插件参数以实现自动化或使用控制界面。
灵活的 MIDI 路由：可将子插件连接在一起或与宿主应用程序连接。
灵活的音频路由：将子插件的输入/输出连接到任何音频通道。
支持外部侧链和多输出。
链接前后增益以实现自动增益补偿。
在插槽之间拖放或剪切、复制和粘贴插件及其设置。
一键调用复杂的处理设置和插件布局，并在您的 DAW 之间共享。
输入和输出电平监控，内置 CPU 指示器。
插件延迟补偿。
用于 Connector 插件的网络音频/MIDI 处理服务器。
支持 VST Shell 插件。
集成撤销/重做功能。
Blue Cat Audio 标准：
可作为独立应用程序使用，并支持 Mac 和 Windows 系统的大多数插件格式。
完全支持 MIDI 控制和自动化，MIDI 学习。
空闲时无 CPU 负载：静音时处理关闭（最佳 CPU 利用率）。
可自定义用户界面，支持透明度和缩放功能。
平滑旁路：无噪音地激活/停用插件。
撤消/重做。
功能齐全的集成预设管理器。
在实例之间复制/粘贴插件状态。
支持任意采样率。
典型应用：插件宿主、自定义通道条、并行处理、效果器链、虚拟总线、虚拟乐器、DAW 之间的共享总线和插件配置、VST 或 Audio Unit 到 AAX、Audio Unit、效果链 A/B 比对、独立音频处理应用程序、多效果处理器。

It is possible to chain effects in series or create up to 8 parallel chains that can be activated independently. This lets you create your favorite effects or instruments configurations within the plug-in, without the need for multiple busses. These configurations can be saved as presets and recalled instantly, or shared with multiple DAWs, using any plug-in format (full list below). Use the built-in audio effects to add color to your own plug-in chains.

Despite the name, you can forget about wires or cables: configuring plug-ins routing is as simple as adding or removing a row or a column in the rack's matrix. All plug-ins can also communicate with each other or with the host application using the virtual MIDI ports offered by the plug-in.

For each plug-in slot, latency compensation, presets management, undo/redo integration, audio i/o selection and individual plug-in bypass are included for optimal operation. The plug-in also stores the position of the window for each plug-in so that the layout is restored with your session or saved with presets.

Also, sub plug-ins can be automated or controlled with external control surfaces using Blue Cat's PatchWork parameters mapping capabilities.

This product is available as an audio plug-in (effect or a virtual instrument) and standalone application, so that it can used alone or inserted on any type of track in your favorite DAW, with up to 16 audio channels.

Input and output level meters are also available to monitor the signal that is dispatched to inserted plug-ins, including side chain and aux channels.

If you are looking for a multiband plug-ins host for multiband processing, check out the Blue Cat's MB-7 Mixer plug-in. Also, any Blue Cat Audio plug-in is compatible and can be hosted by this software.

Looking for more advanced audio routing within PatchWork? Check out Blue Cat's Connector!

Copyright Note: VST is a trademark of Steinberg Media Technologies GmbH.

Main Features:
Configurable VST, VST3 or Audio Unit plug-ins rack: host up to 64 third party plug-ins or instruments in series or parallel.
30 built-in effects: Reverb, EQ, filters, pitch & frequency shifter, delays, modulation effects, compressor, gate, bit crusher, wave shaper and more.
Available as an effect, virtual instrument or standalone application.
Build your own effects chains: up to 8 "pre" and "post" plug-ins slots to chain plug-ins in series.
Parallel processing made easy: up to 8 parallel plug-ins chains, with phase flip, solo and gain controls.
Multicore processing support for parallel chains.
Plug-ins Oversampling: select oversampling ratio and quality for each plug-in.
Host up to 8 virtual instruments in parallel and mix them within the plug-in.
Global Dry/Wet control ("Mix").
Macro controls & parameters mapping: map plug-ins parameters to automate them or use a control surface.
Flexible MIDI routing: connect sub plug-ins together or with the host application.
Flexible Audio routing: connect sub plug-ins i/o to any audio channel.
External side chain and multiple outputs support.
Link pre and post gains for automatic gain compensation.
Drag and drop or cut, copy and paste plug-ins with their settings between slots.
Recall complex processing setups and plug-ins layouts with one click and share them between your DAWs.
Input and output levels monitoring, built-in CPU meter.
Plug-ins Latency compensation.
Network audio/MIDI processing server for the Connector plug-in.
Supports VST Shell plug-ins.
Integrated undo/redo.
Blue Cat Audio Standards:
Available as a standalone application and in most plug-in formats for Mac and Windows.
Full MIDI control and automation support, MIDI Learn.
No CPU load on idle: processing shuts down when fed with silence (optimal CPU usage).
Customizable user interface with transparency & zoom.
Smooth Bypass: noiseless plug-in activation / deactivation.
Undo/Redo.
Full featured integrated presets manager.
Copy/paste the state of the plug-in between instances.
Any sample rate supported.
Typical applications: Plug-ins host, custom channel strip, parallel processing, effects chainer, virtual bussing, virtual instrument, share bus and plug-ins configurations between DAWs, VST or Audio Unit to AAX, Audio Unit, effect chains A/B comparison, standalone audio processing application, multi effects processor.